If you can’t or don’t want to fix your Wireless Temperature Sensor to the wall, you can use the tado° Stand to position your device on a table or other surface in the room.
You can also use the Stand with the Smart AC Control.
This will allow for more flexibility when positioning your devices, to enhance their functions.
Fitting your device onto the Stand
Wireless Temperature Sensor
To fit the Wireless Temperature Sensor to the Stand please do the following:
Remove the backplate of the Wireless Temperature Sensor.
Position the backplate on the Stand, so that the top screw holes on both pieces are aligned.
Use the screws provided with the Stand to fix the backplate to the Stand as shown, then
clip the Wireless Temperature Sensor back onto the backplate.
Smart AC Control
To fit the Smart AC Control to the Stand please do the following:
Unplug the power cable from the device, then
feed the cable through the slot in the Stand and plug the cable back into the Smart AC Control, as shown.
Position the device on the Stand, and
pull the cable up into the narrower section of the slot to secure the device in place.
For best results, position the Smart AC Control near a power socket, with a clear line of sight to the IR transmitter of the AC unit.