Smart AC Control V3+
The Smart AC Control gives you remote control of your air conditioner's cooling and heating via the tado° app. The device connects directly to your Wi-Fi and replaces your current infrared AC remote control.
The Internet Bridge creates a communication link between your tado° devices, the tado° servers and the tado° app. This allows you to control your heating and cooling remotely using the tado° app. The Internet Bridge connects to your router via an Ethernet cable and connects to the power via a USB cable. It provides an ultra-low power radio network for your tado° devices. It also enables Apple HomeKit.
Please note that the earlier model of the Bridge without the pairing button is not HomeKit compatible.
The Smart Thermostat measures the temperature, communicates with the Internet Bridge and enables you to control your heating remotely via your tado° app. It replaces hardwired room and underfloor heating thermostats.
The Smart Thermostat is also available in black.
Wireless Temperature Sensor
The Wireless Temperature Sensor measures and wirelessly controls the temperature. It communicates with your Smart Radiator Thermostats and/or your Wireless Receiver to adjust the heating as needed. The Wireless Temperature Sensor together with the Wireless Receiver replaces wireless room thermostats and receivers.
Smart Radiator Thermostat/Smart Radiator Thermostat Basic
The Smart Radiator Thermostat/Smart Radiator Thermostat Basic mounts on most radiators with a thermostatic radiator valve, either directly or with an adapter, to control your radiator heating. You can group multiple Smart Radiator Thermostats in rooms together.
The Smart Radiator Thermostats can be installed in combination with a Smart Thermostat (and Extension Kit/Wireless Receiver) to enhance your smart heating system by controlling each room individually.
The Wireless Receiver
The Wireless Receiver can control heating or heating and hot water, and communicates wirelessly with the Wireless Temperature Sensor. It is connected directly to your boiler or replaces a two-channel programmer. It is typically needed if your heating system currently has a wireless thermostat or hot water programmer, or does not have a room thermostat at all.
There are two versions of this device:
The Wireless Receiver - Programmer with Hot Water Control (UK)
The Wireless Receiver (EU)
The Extension Kit communicates wirelessly with the Smart Thermostat and is an old version of the Wireless Receiver. It is connected directly to your boiler or replaces a two-channel (heating and hot water) programmer. It is typically needed if your heating system currently has a wireless thermostat or hot water programmer, or does not have a room thermostat at all.
Heat Pump Connector
The Heat Pump Connector uses a Wireless Receiver to give you control over your heat pump functions and schedules from the tado° app. You don't need to remove your existing heat pump controller, as you will still use it for cooling.
The Heat Pump Connector can work alone or together with other tado° devices.
If you have an hourly dynamic energy tariff (Time-of-Use tariff), you can subscribe to tado° Balance for Heat Pumps, which automatically shifts energy consumption to lower-cost periods.