Temperatures and Settings
SYMBOL | MEANING |
Measured Temperature Current measured temperature. | |
Home Mode | |
Home Target Temperature Smart Schedule is active. tado° is in Home Mode and is set to the displayed target temperature. | |
Hot Water production in Home Mode (on/off) Smart Schedule for hot water is active. tado° is in Home Mode and hot water production is currently on/off. | |
Home Mode Hot Water Target Temperature Smart Schedule for hot water is active. tado° is in Home Mode and the hot water is being heated to the displayed target temperature (only available for supported systems). | |
Manual Control | |
Manual Target Temperature Manual Control is active. tado° is set to the displayed target temperature. | |
Hot Water production in Manual Control (on/off) Manual Control is active and the hot water production is currently on/off. | |
Manual Hot Water Target Temperature Manual Control is active and the hot water is being heated to the displayed target temperature (only available for supported systems). | |
Away Mode | |
Away Target Temperature tado° is in Away Mode. It is set to the displayed target temperature based on the settings you’ve specified for the Away Mode. | |
Hot Water production in Away Mode (on/off) tado° is in Away Mode. Hot water production is currently on/off based on the settings you’ve specified for the Away Mode. | |
Away Mode Hot Water Target Temperature (adjustable) tado° is in Away Mode. Hot water is being heated to the displayed target temperature (only available for supported systems) based on the settings you’ve specified for the Away Mode. | |
Open Window Detection An open window has been detected and heating in this room is currently turned off. |
Errors and Warnings
SYMBOL | MEANING |
Low Battery The batteries are running low and need to be replaced. | |
Depleted Battery The batteries are depleted and need to be replaced (changes on the device user interface are blocked). | |
Firmware Update The device is updating to a new firmware version. | |
Configuration Download The device is downloading its configuration. | |
Synchronising Changes made to tado° have not yet been synced to the device. | |
Legionnaires’ Disease Protection The boiler is firing to disinfect the hot water. | |
Pairing Error Pairing not successful. | |
Default Configuration Error The wiring does not match the way the device is set up. A voltage has been detected on the low voltage terminals (+ and -). |
Installation and Reset
SYMBOL | MEANING |
Pairing The device is looking for an Internet Bridge. | |
Paired The device is successfully paired to an Internet Bridge. | |
Installer Menu Entry point to the Installer Menu. | |
Restart Pairing Restart Pairing (used when pairing device to a different Internet Bridge). | |
Factory Reset | |
Exit Menu |
More information:
What do the symbols on the Smart Radiator Thermostat user interface mean?