tado° can control almost all kinds of heating systems. The precise way tado° controls your system depends on which heating system you have.

tado° devices usually either replace existing room thermostats, radiator thermostats and controllers or connect directly to the boiler. For more information on which tado° products are recommended for your heating system, please consult the corresponding article below.

Radiator heating system controlled by a central thermostat

A boiler usually supplies heating for the radiators and is controlled by a central room thermostat. The heating can also be supplied through central or district heating instead.

Underfloor heating system controlled by multiple room thermostats

This system is usually controlled by a room thermostat for each room and supplied by one central boiler, or district heating.

Radiator heating system without a central thermostat

This system is usually supplied by central or district heating but the resident has no access to the boiler. The radiators are controlled by radiator thermostats.

Radiator heating system divided into multiple zones

This system is usually supplied by one central boiler and controlled by a room thermostat (and/or a programmer) for each heating zone.

Radiator and/or underfloor heating system is supplied by one heat source while another heat source supplies the rest of the heating system

This system is usually supplied by two boilers controlled by one room thermostat for each part of the house.

Radiator heating system and an underfloor heating system divided into multiple rooms

This system is usually supplied by one central boiler and controlled by a room thermostat and radiator thermostats.

More information: