Please note: For the Smart AC Control V3+, you’ll need to use the Apple Home App to configure Wi-Fi settings for iOS devices.
When the Smart AC Control has no Wi-Fi configuration, a unique 4-digit code (XXXX) will be shown on its display.
The device creates a wireless access point with the name tadoXXXX. Once this is shown, your Smart AC Control V3+ is ready to receive new Wi-Fi credentials.
If you're not able to connect the Smart AC Control V3+ to Wi-Fi, please do the following:
- Unplug your Smart AC Control V3+ from the power supply. Wait for two minutes and plug it back in to restart the device.
- Restart your iOS device.
- Go to Wi-Fi settings on your iOS device. Scroll down till you see the section Set up new device. Here you’ll see the access point code tadoXXXX.
- Select the access point code tadoXXXX. If you have the Smart AC Control V3+, the configuration will then be completed in the Home app.
If the Smart AC Control was already installed in your tado° Home, no further action is needed.
If you’re installing the Smart AC Control V3+ for the first time, you’ll see the wrench symbol on its display and you can continue your installation in the tado° app.
If you’re having trouble configuring the Wi-Fi settings for your Smart AC Control V3+ using your iOS device, try doing it using your PC as explained in this article.