Smart Radiator Thermostats replace your existing thermostatic radiator valve (TRV) heads. The Smart Radiator Thermostats fit almost any valve body, either directly or by using an adapter.

The screw nut for mounting the Smart Radiator Thermostat fits on any M30x1.5 radiator valve body thread. The included adapters allow mounting the device on many more valve types.

To identify which adapter is needed for your specific valve, please take a look at the following table.

Manufacturer: Danfoss
Valve and Adapter: RA
Availability: Included in package*

Manufacturer: Danfoss
Valve and Adapter: RAV
Availability: Included in package*

Manufacturer: Danfoss
Valve and Adapter: RAVL
Availability: Included in package*

Manufacturer: Comap, Herz, Terrier, Siemens, Olymp
Valve and Adapter: M28x1.5
Availability: Included in package*

Manufacturer: Caleffi
Availability: Included in package*

Manufacturer: Giacomini
Availability: Included in package*

Manufacturer: Vaillant
Valve and Adapter: 30. mm
Availability: not provided

Manufacturer: Oventrop
Valve and Adapter: M30x1.0
Availability: not provided

Manufacturer: Ista
Valve and Adapter: M30x1.0
Availability: not provided

Manufacturer: Orkli
Valve and Adapter: M28x1.0
Availability: not provided

*Please contact us if one of the adapters above should be missing in the package.

For more information and to find out if the Smart Radiator Thermostat works with your radiator valve, please check our Compatibility Guide.

Did this answer your question?