Please note: For the Smart AC Control V3+, you’ll need to use the Apple Home App to configure Wi-Fi settings for iOS devices.

When the Smart AC Control has no Wi-Fi configuration, a unique 4-digit code (XXXX) will be shown on its display.

The device creates a wireless access point with the name tadoXXXX. Once this is shown, your Smart AC Control is ready to receive new Wi-Fi credentials.

If you're not able to connect the Smart AC Control to Wi-Fi, please do the following:

  1. Unplug your Smart AC Control from the power supply. Wait for two minutes and plug it back in to restart the device.
  2. Restart your iOS device.
  3. Go to Wi-Fi settings on your iOS device. Scroll down till you see the section Set up new device. Here you’ll see the access point code tadoXXXX.
  4. Select the access point code tadoXXXX. If you have the Smart AC Control V3+, the configuration will then be completed in the Home app.

If the Smart AC Control was already installed in your tado° Home, no further action is needed.

If you’re installing the Smart AC Control for the first time, you’ll see the wrench symbol on its display and you can continue your installation in the tado° app.

If you’re having trouble configuring the Wi-Fi settings for your Smart AC Control using your iOS device, try doing it using your PC as explained in this article.

Did this answer your question?