What do the symbols on the Smart Radiator Thermostat user interface mean?

Temperatures and Settings

Symbol Meaning
 

Target Temperature
Target temperature for devices that have not been paired yet

 

Manual Target Temperature
Manual control is currently active at the displayed target temperature

 

Home Target Temperature
The Smart Schedule is active and in Home Mode at the displayed target temperature

Away Target Temperature
The Smart Schedule is active and in Away Mode at the displayed target temperature

115000829886_SRT-UI_EN.png

Open Window Detection
An open window has been detected and heating in this zone is currently turned off

 

Errors and Warnings

Symbol Meaning
 

Low Battery
The batteries are running low and need to be replaced

 

Firmware Download
The device is updating to a new firmware version

 

Configuration Download
The device is downloading its configuration

 

Synchronizing
There were changes on the device which have not been transmitted to other devices in the same zone yet

 

Pairing Error
Pairing has not been successful

 

Calibration End Position not Found
The device did not detect the calibration end point

 

No Contact during Calibration
The device did not detect a valve during calibration

 

Difference in Calibration Start and End Point too Small
The difference between the detected start and end point of the calibration is too small

 

Installation and Reset

Symbol Meaning
 

Pairing
The device is looking for an Internet Bridge

 

Paired
The device is successfully paired to an Internet Bridge

 

Calibrating
The device is looking for the start and end point of the valve it is mounted to

 

Calibrated
The device has calibrated successfully

 

Unmounted
Whenever the wrench is displayed, the device is not detected to be mounted on the mounting bracket