Temperatures and Settings

SYMBOL

MEANING

Measured Temperature

Current measured temperature.

Home Mode

Home Target Temperature

Smart Schedule is active. tado° is in Home Mode and is set to the displayed target temperature.

Hot Water production in Home Mode (on/off)

Smart Schedule for hot water is active. tado° is in Home Mode and hot water production is currently on/off.

Home Mode Hot Water Target Temperature

Smart Schedule for hot water is active. tado° is in Home Mode and the hot water is being heated to the displayed target temperature (only available for supported systems).

Manual Control

Manual Target Temperature

Manual Control is active. tado° is set to the displayed target temperature.

Hot Water production in Manual Control (on/off)

Manual Control is active and the hot water production is currently on/off.

Manual Hot Water Target Temperature

Manual Control is active and the hot water is being heated to the displayed target temperature (only available for supported systems).

Away Mode

Away Target Temperature

tado° is in Away Mode. It is set to the displayed target temperature based on the settings you’ve specified for the Away Mode.

Hot Water production in Away Mode (on/off)

tado° is in Away Mode. Hot water production is currently on/off based on the settings you’ve specified for the Away Mode.

Away Mode Hot Water Target Temperature (adjustable)

tado° is in Away Mode. Hot water is being heated to the displayed target temperature (only available for supported systems) based on the settings you’ve specified for the Away Mode.

Open Window Detection

An open window has been detected and heating in this room is currently turned off.

Errors and Warnings

SYMBOL

MEANING

Low Battery

The batteries are running low and need to be replaced.

Depleted Battery

The batteries are depleted and need to be replaced (changes on the device user interface are blocked).

Firmware Update

The device is updating to a new firmware version.

Configuration Download

The device is downloading its configuration.

Synchronising

Changes made to tado° have not yet been synced to the device.

Legionnaires’ Disease Protection

The boiler is firing to disinfect the hot water.

Pairing Error

Pairing not successful.

Default Configuration Error

The wiring does not match the way the device is set up. A voltage has been detected on the low voltage terminals (+ and -).

Installation and Reset

SYMBOL

MEANING

Pairing

The device is looking for an Internet Bridge.

Paired

The device is successfully paired to an Internet Bridge.

Installer Menu

Entry point to the Installer Menu.

Restart Pairing

Restart Pairing (used when pairing device to a different Internet Bridge).

Factory Reset

Exit Menu

More information:
What do the symbols on the Smart Radiator Thermostat user interface mean?

Did this answer your question?