All Collections
Installing and setting up tado°
Installing tado° heating products
How do I pair the tado° devices with the Internet Bridge?
How do I pair the tado° devices with the Internet Bridge?
tado° avatar
Written by tado°
Updated over a week ago

For pairing devices with your Internet Bridge, the Internet bridge has to be in pairing mode. Active pairing mode is indicated by a rapidly flashing pairing LED on the Internet Bridge or of the link LED on the earlier version of the tado° Bridge (without pairing button).

The distance between the Internet Bridge and each device should be at least 3 meters.

Smart Thermostat / Wireless Temperature Sensor

Press the button for 3 seconds to start pairing, indicated by two moving chain links appearing on the display. When successful, the two chain links stay joined.

Image of Smart thermostat with two chain links on face of device, indicating pairing.

Smart Radiator Thermostat

Press the pairing button above the battery compartment of the Smart Radiator Thermostat for 3 seconds to start pairing, indicated by three lines appearing on the display. Successful pairing is displayed by the three lines turning solid.

Smart Radiator Thermostat Basic

Press the pairing button above the battery compartment of the Smart Radiator Thermostat Basic for 3 seconds to start pairing. Pairing is indicated on the device by three flashing dashes next to the temperature markers; first the first three, then the second three and then the last three. Pairing is successful when all the dashes next to the temperature markers turn solid on.

Wireless Receiver

With the cover of the Wireless Receiver on, press the main button for 3 seconds until the LED starts flashing rapidly, to start pairing. Successful pairing is indicated by a solid on LED.

Extension Kit

Press the button on top of the device for 3 seconds until the LED starts flashing rapidly to start pairing. Successful pairing is indicated by 4 flashes with a pause or a slowly pulsing LED.

Note: If you disconnect the Internet Bridge, your tado° devices will constantly search for an Internet connection and their batteries will deplete much faster. tadoº devices are designed to remain connected to the Internet Bridge and use charged batteries, so your heating system may react unexpectedly if you disconnect it for a long period of time or disregard low battery notifications.

More information:

Did this answer your question?